How to Choose the Best Induction Pan

The Key Features of an Induction Pan

The main characteristic that sets an induction-compatible pan apart is its base, which must have at least one layer of metal to interact with the sensors on your induction cooktop. While most pans available on the market today (even entry-level models) are designed to work on induction, they don’t all perform equally well. For this reason, it’s essential to consider other important factors when choosing the right pan.

Durability is Essential

Induction cooking generates intense heat, so your pan must be sturdy enough to withstand high temperatures. If you’re looking at steel pans, opt for a model with a thickness of at least 3 mm. This will help ensure the pan doesn’t warp when exposed to high heat.

Similarly, for stainless steel pans, the layered bottom, which is responsible for heat transmission and distribution, should be at least 8 mm thick. The base also needs to be perfectly flat (without any bumps) and should extend as far as possible up the sides of the pan. This design helps the heat spread evenly across the entire internal surface, including the outer edges.

While steel and stainless steel are the most common materials for induction pans, you’ll also find options made of cast aluminum or cast iron. Despite the similar names, these materials are quite different. Check out our materials guide for more details.

Cast aluminum pans always come with a layered base to make them compatible with induction. Like stainless steel pans, this base must be thick enough for optimal performance. These pans are often coated with a non-stick layer that should include at least three layers for durability. Be sure not to overheat these pans, as doing so could damage the coating. To extend the life of your non-stick coating, avoid preheating an empty aluminum pan and don’t use more than two-thirds of your cooktop’s power.

For cast iron pans (also called heavy iron), which are naturally induction-compatible without a layered base, care must be taken to avoid thermal shocks that can cause irreversible cracks. When cooking, gradually increase the temperature rather than starting with high heat. Cast iron pans usually don’t have a non-stick coating, so seasoning the pan is necessary to maintain its cooking surface.

The Importance of the Handle

The handle of your induction pan is usually made of the same material as the body, whether it’s steel or stainless steel. Cast aluminum pans often have resin handles, while cast iron pans come with wooden handles. Ideally, the handle should be welded in at least nine points or, even better, attached with two rivets.

A common question is whether the handles of induction pans heat up. Since induction cooktops don’t emit heat, the risk of the handle becoming hot is minimal. It’s only if the pan is used for an extended period (over 30 minutes) that the handle might get warm, but never to the point where it’s dangerous or causes burns.

Matching Pan Size to Burner

Contrary to popular belief, your induction pan does not need to be exactly the same diameter as your induction burner. A size difference of up to 2 inches is usually acceptable and won’t affect the performance of your cooktop or pan. Only if your pan is significantly smaller than the burner will the sensors struggle to detect it, potentially impacting functionality.

By considering the material, durability, handle design, and proper sizing, you’ll be well on your way to choosing the perfect induction pan for your kitchen.

Get our best recipes & expert tips right into your inbox!

Join over 10k subscribers

By submitting above, you agree to our privacy policy.